Reference

Bowling Terms: A Plain-English Glossary of 100+ Words

From frame and fill ball to Brooklyn, bucket and the 7-10 split: the words you'll hear at the lanes, grouped by topic and defined in a sentence or two.

On this page
  1. What are bowling terms?
  2. Scoring terms
  3. The lane
  4. Equipment
  5. Shots and ball motion
  6. Pin leaves and splits
  7. Bowling slang
  8. FAQ

Bowling has its own language. A teammate might ask whether you left a bucket or a washout, the lane might be “breaking down,” and a strike can be a “Brooklyn.” None of it is hard once someone explains it.

This glossary covers the terms you’ll actually hear at the lanes, grouped by topic: scoring, the lane, equipment, shots and ball motion, pin leaves and splits, and slang. Rule-based definitions follow the United States Bowling Congress (USBC) playing rules and equipment specifications. Slang varies by region, so where a term has more than one meaning, both are given.

What are bowling terms?

Bowling terms are the words bowlers use for scoring, the parts of the lane, equipment, ball motion and the pins left standing after a shot. Some are official rule terms defined by the United States Bowling Congress, such as strike, spare, split and foul. Others are long-standing slang, such as turkey, Brooklyn and bucket, whose meanings can vary slightly by region.

Scoring terms

For worked examples of every term below, see how to score bowling.

Average: Your total pinfall divided by the number of games bowled. Leagues use it to set handicaps and to place bowlers in divisions.

Clean game: A game with a mark (strike or spare) in all ten frames and no open frames. A clean game of all spares scores at least 100.

Count: The pins knocked down on the ball after a strike or spare, which are added as bonus to that earlier frame. “Good count” means you knocked down a lot of pins on that ball.

Dead ball: A delivery that doesn’t count, for example because a pin was missing from the setup or another bowler or object interfered. The pins are reset and the bowler rolls again.

Double: Two strikes in a row. The first strike’s frame scores 20 plus the pins from the next ball.

Dutch 200: A game of alternating strikes and spares. It always totals exactly 200.

Fill ball: A bonus ball in the 10th frame. A strike in the 10th earns two fill balls and a spare earns one, and they only count toward the 10th frame.

Foul: Going over the foul line with any part of your body and touching the lane, equipment or building beyond it, during or after a delivery. The ball counts as a delivery, but any pins it knocks down score zero.

Frame: One of the ten turns in a game. You get up to two balls per frame, except in the 10th frame, where a strike or spare earns extra balls.

Game: Ten frames. The highest possible score is 300.

Handicap: Pins added to a bowler’s score, based on their average, so bowlers of different skill can compete fairly. Each league sets its own handicap formula.

Mark: A strike or a spare. “Getting a mark” means you didn’t leave an open frame.

Open frame: A frame with pins still standing after both balls. You score only the pins you knocked down, with no bonus.

Perfect game: A score of 300, made by bowling 12 strikes in a row in one game: one in each of frames 1 to 9 and three in the 10th.

Scratch: A score with no handicap added. A “scratch league” or “scratch tournament” uses actual scores only.

Series: A set of games, usually three, added together. League results are often reported as a three-game series.

Spare: Knocking down all the pins left from your first ball with your second ball. It’s marked with a slash (/) and scores 10 plus the pins from your next ball.

Strike: Knocking down all ten pins with the first ball of a frame. It’s marked with an X and scores 10 plus the pins from your next two balls.

Tenth frame: The last frame of a game, and the only one that can have three balls. You get a third ball only if you strike or spare.

The lane

Approach: The area behind the foul line where you take your steps before releasing the ball. It’s at least 15 feet long.

Approach dots: Two sets of dots on the approach, about 12 and 15 feet behind the foul line. Bowlers use them to set their starting position.

Arrows: Seven aiming targets about 15 feet past the foul line, set on every fifth board. Most bowlers aim at an arrow rather than at the pins.

Backend: The last part of the lane, from where the oil ends to the pins. It’s usually dry, so this is where a hook ball makes its turn.

Board: One of the 39 strips that make up the width of a lane. Boards are counted from the edge, and bowlers describe their target by board number.

Breakdown: The way the oil pattern wears where balls roll through it, making that area drier. A lane that “breaks down” makes balls hook sooner.

Carrydown: Oil that balls drag from the front of the lane onto the dry backend. It can make later shots skid farther before they hook.

Foul line: The line that separates the approach from the lane. Crossing it with any part of your body during a delivery is a foul.

Gutter (channel): The trough on each side of the lane. A ball that drops into it before reaching the pins can’t knock down any pins that count.

Heads: The first part of the lane, from the foul line to about 20 feet out.

House shot: The oil pattern most bowling centers use for open and league play. It puts more oil in the middle than near the edges, which steers balls back toward the pocket and makes scoring easier.

Kickbacks: The side walls on either side of the pin deck. Pins that bounce off them and knock down other pins count.

Lane: The playing surface from the foul line to the pins. It’s 60 feet from the foul line to the center of the head pin and about 41.5 inches wide.

Lane conditioner (oil): A thin layer of oil applied to the front part of the lane. It protects the surface and shapes how much a ball can hook.

Oil pattern: How the conditioner is spread across the lane’s length and width. Patterns differ in length, volume and shape, and they change how every ball reacts.

Pair: The two side-by-side lanes a league team bowls on, alternating lanes each frame. They usually share a ball return.

Pin deck: The area at the end of the lane where the pins stand.

Pinsetter: The machine that picks up and resets the pins and clears fallen pins. It’s also called a pinspotter.

Sport pattern (sport shot): A flatter oil pattern with less difference between the middle and the edges than a house shot. It’s harder to score on and is used in many tournaments.

Bowling oil patterns explained goes deeper on how lane oil is applied and read.

Equipment

For buying advice on everything here, start with the bowling balls guide, the bowling shoes guide and the bowling accessories guide.

Asymmetric core: A core that’s deliberately uneven inside. It helps the ball change direction more sharply near the pins and suits experienced bowlers on heavier oil.

Benchmark ball: A ball with a medium, predictable reaction. Bowlers throw it first to read how a lane is playing.

Bowling ball: A ball up to 16 pounds and 8.500 to 8.595 inches in diameter, with no minimum weight. Not sure what weight you need? See what weight bowling ball to use.

Bowling pin: A 15-inch-tall pin weighing between 3 lb 6 oz and 3 lb 10 oz. Ten pins are set in a triangle with their centers 12 inches apart.

Conventional grip: A drilling where your fingers go in to the second knuckle. It’s secure and easy to control, and it’s what house balls use.

Core (weight block): The dense shape inside a ball. Its design affects how the ball rotates and when it changes direction.

Coverstock: The outer shell of a ball. Its material and surface decide how much the ball grips the lane.

Differential: A number that measures a core’s flare potential. Higher differential generally means more hook potential, and USBC caps it at 0.060.

Fingertip grip: A drilling where your fingers go in only to the first knuckle, with a longer span. It adds revolutions and is standard on most reactive balls.

Flare: The rings of oil lines a ball leaves as its axis shifts while it rolls. More flare means the ball keeps touching fresh, dry cover, which adds hook potential.

House ball: A ball the bowling center provides for free use, usually plastic with a conventional grip.

Layout: Where the holes are drilled relative to the core. The layout changes how strongly and when a ball hooks.

Polyester (plastic): A hard, slick coverstock that barely grips the lane, so the ball goes fairly straight. It’s used for house balls, beginners and spare balls.

Positive axis point (PAP): The point on a ball that the ball initially rotates around after your release. It’s unique to each bowler, and drillers measure it to plan a layout.

Pro shop: A shop, usually inside a bowling center, that fits, drills and resurfaces balls and sells equipment.

Reactive resin: A tacky coverstock that grips the drier part of the lane and hooks more than plastic or urethane. Most league bowlers throw reactive balls.

RG (radius of gyration): A number that describes how mass is spread inside a ball. A lower RG revs up and hooks earlier; USBC allows 2.46 to 2.80.

Rosin bag: A small cloth bag of powder bowlers tap to dry their hand. Use it on your hand only, never on your shoes or the approach.

Slide sole: The smooth sole on a bowling shoe that lets your final step glide. Performance shoes have interchangeable slide soles and heels; see the best men’s bowling shoes and best women’s bowling shoes.

Span: The distance between the thumb hole and the finger holes. A correct span lets your hand rest on the ball without stretching or squeezing.

Spare ball: A plastic ball that rolls straight, used for single pins and other spares so lane oil doesn’t make the ball hook.

Surface (grit): The texture of a coverstock, given as a grit number. Rougher surfaces grip earlier, and smoother or polished ones skid farther.

Symmetric core: A core that’s balanced the same way around every axis. It gives a smooth, predictable arc and suits most bowlers.

Urethane: A coverstock that grips more than plastic but less than reactive resin, with a smooth, controlled arc. Many bowlers use it on drier lanes.

Wrist support: A brace or glove that holds the wrist steady through the swing. See the best bowling wrist braces and best bowling gloves.

Shots and ball motion

Axis rotation: The sideways angle the ball spins on, sometimes called side roll. More axis rotation generally means the ball skids farther and then hooks harder.

Axis tilt: The angle the ball spins on relative to the lane, like a spinning top. More tilt makes the ball skid farther before it hooks.

Backup ball (reverse hook): A ball that curves the opposite way from a normal hook: to the right for a right-hander.

Breakpoint: The point where the ball makes its strongest move toward the pins.

Brooklyn (Jersey): A shot that crosses over and hits the opposite pocket: the 1-2 side for a right-hander or the 1-3 side for a left-hander. It still counts if it strikes.

Carry: How well your shot knocks down all the pins. Good carry means more of your pocket hits turn into strikes.

Cranker: A bowler with a high rev rate who relies on power and a big hook.

Delivery: The act of throwing the ball, from approach through release. In the rules, a delivery counts once the ball crosses the foul line.

Entry angle: The angle at which the ball enters the pins. A ball arriving at an angle carries strikes better than one rolling straight in.

High hit: A shot that hits too much of the head pin, too close to straight-on. It often leaves splits.

Hook: A ball that curves toward the pins in the back part of the lane. It’s created by side rotation and grip on the dry backend.

Light hit: A shot that catches too little of the head pin. It often leaves the 5 pin or a corner pin.

Loft: Throwing the ball out past the foul line so it lands farther down the lane. A little is normal, but heavy lofting can damage lanes and hurts accuracy.

Nose hit: A shot that hits the head pin dead center. It’s a common way to leave a split.

Phases of ball motion: Skid, hook and roll. The ball slides through the oil first, curves once it meets friction, then rolls forward into the pins.

Pocket: The strike target: between the 1 and 3 pins for a right-hander, or the 1 and 2 pins for a left-hander. A pocket hit at a good angle gives the best chance of a strike.

Rev rate (revs): How fast the ball rotates, usually measured in revolutions per minute (rpm). A higher rev rate generally means more hook.

Spot bowling (target bowling): Aiming at the arrows or dots instead of at the pins. Most coaches teach it because a close target is easier to hit.

Straight ball: A ball thrown with little or no rotation so it travels in a fairly straight line. It’s the usual way to shoot corner-pin spares.

Stroker: A bowler who relies on a smooth, accurate swing and a moderate hook rather than power.

Tweener: A bowler whose style falls between a stroker and a cranker.

Two-handed delivery: A style where both hands stay on the ball through the swing until release, usually with no thumb in the ball. It produces high rev rates.

For technique, see how to curve a bowling ball and how to spin a bowling ball.

Pin leaves and splits

Pins are numbered 1 to 10, from the front of the triangle to the back row, left to right from the bowler’s view. The back row is the 7, 8, 9 and 10.

7-10 split: The two back corner pins, the 7 and 10. It’s one of the hardest spares to convert.

Baby split: A split with pins close enough to convert by hitting both with one ball, such as the 2-7 or 3-10.

Big Four: A split leaving the 4, 6, 7 and 10 pins.

Bucket: A diamond-shaped leave of four pins: the 2-4-5-8 or the 3-5-6-9.

Christmas tree: The 3-7-10 or 2-7-10 split, named for its triangle shape.

Conversion: Picking up a spare or split by knocking down all the remaining pins with your second ball.

Deadwood: Fallen pins left on the pin deck or in the gutter. They must be cleared before the next ball.

Double wood: A leave where one pin stands directly behind another, such as the 2-8 or 3-9.

Greek church: A five-pin split with three pins on one side and two on the other, such as the 4-6-7-9-10 or 4-6-7-8-10.

Head pin: The 1 pin, at the front of the triangle.

Kingpin: The 5 pin in most usage, since it sits in the center of the rack. Some bowlers use it for the head pin instead.

Leave: The pins still standing after your first ball.

Lily (sour apple): The 5-7-10 split.

Messenger: A pin that slides or bounces across the deck to knock down another pin, often the head pin taking out a corner pin.

Ringing 10: A 10 pin left standing after a good-looking pocket hit, because the 6 pin wraps around it into the gutter.

Sleeper: The hidden back pin in a double wood leave, such as the 8 pin behind the 2.

Solid 8 (stone 8): An 8 pin left standing after an apparently perfect pocket hit by a right-hander. For a left-hander it’s the 9 pin.

Split: A leave after the first ball where the head pin is down and at least one pin is down between two standing pins (such as the 7-9 or 3-10) or directly in front of them (such as the 5-6). It’s marked with a circle on the score sheet.

Tap: A single pin left standing on a shot that looked like a strike, such as a lone 10 pin or 8 pin.

Washout: A leave that looks like a split but isn’t one because the head pin is still standing, such as the 1-2-10 or 1-2-4-10.

Bowling slang

Anchor: The last bowler in a team’s lineup, often its most reliable player.

Field goal: A ball that rolls between the two pins of a split, such as the 7-10, without touching either.

Four-bagger: Four strikes in a row. A five-bagger is five, and a six-pack is six.

Gutter ball: A ball that rolls into the gutter before reaching the pins.

Hambone: Four strikes in a row, another name for a four-bagger.

Kegler: Another word for a bowler, borrowed from German.

Leadoff: The first bowler in a team’s lineup.

League: A group of teams or bowlers who compete on a regular schedule, usually weekly, over a season.

Open bowling: Casual bowling outside of league or tournament play.

Punch out (strike out): Finishing a game with strikes, usually all the balls in the 10th frame.

Ten in the pit: A strike where all ten pins fly cleanly into the pit.

Turkey: Three strikes in a row in the same game.

Frequently asked questions

What is a turkey in bowling?

A turkey is three strikes in a row in the same game. Four in a row is often called a four-bagger or hambone, and six in a row a six-pack.

What is a split in bowling?

Under USBC rules, a split is a leave after the first ball where the head pin is down and at least one pin is down between two standing pins (such as the 7-10 or 3-10) or directly in front of them (such as the 5-6). Splits are marked with a circle on the score sheet.

What does Brooklyn mean in bowling?

A Brooklyn is a shot that crosses over and hits the opposite pocket: the 1-2 side for a right-hander or the 1-3 side for a left-hander. It's also called a Jersey hit.

How many strikes is a perfect game?

Twelve. A perfect game is 300, which takes a strike in each of the first nine frames plus three strikes in the 10th frame. See how to score bowling for the full math.

What is the pocket in bowling?

The pocket is the gap between the head pin and the pin beside it on your bowling-hand side: the 1-3 for right-handers and the 1-2 for left-handers. Hitting it at an angle gives the best chance of a strike.

What is a clean game?

A clean game has a mark (a strike or spare) in all ten frames, with no open frames.