How to Score Bowling: Strikes, Spares and the 10th Frame
Strikes add the next two balls, spares add the next one, and the 10th frame can take three. Here is how the math works, with worked examples and a score sheet that adds it all up for you.
Bowling scores look simple on the overhead screen, but the math behind them confuses a lot of new bowlers. A strike isn’t just 10 points, the total sometimes stays blank, and the 10th frame plays by its own rules.
This guide explains how scoring works, frame by frame, using the rules published by the United States Bowling Congress (USBC). It’s part of the BowlingLine.com learn to bowl series, and it includes a calculator that does the adding for you.
Bowling score calculator
Tap the number of pins each ball knocks down, or X for a strike and / for a spare. The sheet fills in the marks and running totals the same way a bowling center’s automatic scorer does, and shows the highest score still possible.
Frame 1, ball 1. Tap how many pins the ball knocked down.
Score 0
Max possible 300
- Frame 1: not bowled yet.
- Frame 2: not bowled yet.
- Frame 3: not bowled yet.
- Frame 4: not bowled yet.
- Frame 5: not bowled yet.
- Frame 6: not bowled yet.
- Frame 7: not bowled yet.
- Frame 8: not bowled yet.
- Frame 9: not bowled yet.
- Frame 10: not bowled yet.
Keyboard: type 0 to 9, X or / (a hyphen also counts as 0). Backspace undoes the last ball.
What is bowling scoring?
Bowling scoring is the method used to total a ten-pin game of 10 frames, where each frame counts the pins knocked down plus a bonus for strikes and spares. A strike scores 10 plus the next two balls, a spare scores 10 plus the next ball, and an open frame scores only its own pins. The running total after the 10th frame is the game score, with a maximum of 300.
How bowling scoring works
Every frame gives you up to two balls to knock down all 10 pins. What you write down, and when you can add it, depends on whether you cleared the pins.
Open frames
If pins are still standing after your second ball, the frame is open. Its score is just the pins knocked down by both balls.
For example, 6 pins on the first ball and 2 on the second scores 8. If your running total was 40, it becomes 48.
Spares
A spare means you knocked down all 10 pins using both balls of the frame. It’s marked with a slash (/) and scores 10 plus the pins on your next ball.
Say you roll 7 and then 3 for a spare, and your next ball knocks down 8. The spare frame is worth 10 + 8 = 18. You can’t fill in its total until that next ball is rolled.
Strikes
A strike means all 10 pins fell on the first ball of the frame. It’s marked with an X, the frame ends right away, and it scores 10 plus the pins on your next two balls.
A strike followed by 5 and 3 is worth 10 + 5 + 3 = 18. A strike followed by two more strikes is worth 30, which is why strings of strikes (a double, a turkey) push scores up so quickly.
| Frame result | Mark | Frame score | When you can total it |
|---|---|---|---|
| Open frame | Two numbers, e.g. 6 2 | Pins from both balls | Right away |
| Spare | Number then / | 10 + next ball | After 1 more ball |
| Strike | X | 10 + next two balls | After 2 more balls |
The 10th frame
The 10th frame is the only one that can have three balls. Under USBC rules, a strike in the 10th earns two more balls, and a spare earns one more. An open 10th frame ends after two balls.
The extra balls exist so that a strike or spare in the last frame can collect its bonus. That’s why the 10th frame doesn’t add any bonus of its own: you simply add up its two or three balls.
| 10th frame | Balls | Example | 10th frame score |
|---|---|---|---|
| Open | 2 | 7 2 | 9 |
| Spare | 3 | 8 / 6 | 10 + 6 = 16 |
| Strike, then two balls | 3 | X 7 2 | 10 + 7 + 2 = 19 |
| Strike, then a spare | 3 | X 7 / | 10 + 7 + 3 = 20 |
| Three strikes | 3 | X X X | 30 |
After a strike or a spare in the 10th, the pins are reset for the next ball. After a strike followed by a non-strike (X 7), only the pins left from that second ball count, so the third ball can knock down at most 3.
The maximum score is 300
A perfect game is 12 strikes in a row: one in each of frames 1 to 9 plus three in the 10th. Every frame is then worth 30, and 10 frames of 30 make 300.
There’s no way past 300, because no frame can be worth more than 30. A gutter game scores 0, and a game of all spares with 5 pins on every ball scores 150.
Want more strikes on your own sheet? See how to bowl a strike.
Worked example: scoring a full game
Here’s a complete game, frame by frame. Follow the running total to see how each strike and spare picks up its bonus from the balls that come after it.
| Frame | Balls | Marks | Frame score | Running total |
|---|---|---|---|---|
| 1 | 10 | X | 10 + 7 + 3 = 20 | 20 |
| 2 | 7, 3 | 7 / | 10 + 9 = 19 | 39 |
| 3 | 9, 0 | 9 - | 9 | 48 |
| 4 | 10 | X | 10 + 10 + 8 = 28 | 76 |
| 5 | 10 | X | 10 + 8 + 2 = 20 | 96 |
| 6 | 8, 2 | 8 / | 10 + 6 = 16 | 112 |
| 7 | 6, 2 | 6 2 | 8 | 120 |
| 8 | 10 | X | 10 + 9 + 1 = 20 | 140 |
| 9 | 9, 1 | 9 / | 10 + 10 = 20 | 160 |
| 10 | 10, 8, 1 | X 8 1 | 19 | 179 |
Notice frame 4. Its two bonus balls come from frame 5 (a strike) and the first ball of frame 6 (8 pins), so it’s worth 28. Enter the same balls in the calculator above and it will show 179.
Two quick reference games
| Game | Every frame | Final score |
|---|---|---|
| All gutter balls | - - | 0 |
| All 9s and misses | 9 - | 90 |
| All spares, 5 on every ball | 5 / (bonus 5) | 150 |
| All spares, 9 then 1 | 9 / (bonus 9) | 190 |
| All strikes | X (X X X in the 10th) | 300 |
Bowling scoring symbols
Score sheets and automatic scorers use a short set of marks. Learning them makes it easy to read anyone’s game at a glance.
| Symbol | Meaning |
|---|---|
| X | Strike: all 10 pins on the first ball |
| / | Spare: the remaining pins on the second ball |
| - | Miss: no pins knocked down on that ball |
| A number (1 to 9) | Pins knocked down on that ball |
| Circled number or S | Split: pins left standing with a gap between them after the first ball |
| F | Foul: the bowler crossed the foul line, and that ball’s pins don’t count |
USBC notes that a split is usually shown with a circle around the first-ball count or an S in front of it, though other methods are allowed. For more vocabulary, such as double, turkey and pocket, see the bowling terms glossary.
How to score a game by hand, step by step
- Write each ball in the small boxes. First ball on the left, second ball on the right. In frames 1 to 9, a strike goes in the right-hand box and the left box stays empty.
- Use the marks. X for a strike, / for a spare, - for a miss, and the pin count otherwise.
- Total open frames right away. Add both balls to the previous running total.
- Wait on strikes and spares. Leave the total blank until you’ve rolled the bonus balls (two for a strike, one for a spare).
- Fill in pending frames in order. When a bonus is known, add the frame and carry the running total forward. Several frames can resolve at once after a string of strikes.
- Finish the 10th. Add its two or three balls to the running total. That number is your score.
Other scoring formats
Some televised and international events have used current frame scoring, a simplified format trialed by World Bowling. In it, a strike counts 30, a spare counts 10 plus the first ball of that frame, and an open frame counts its pins, so every frame is final as soon as it’s bowled.
It still tops out at 300, but its scores aren’t directly comparable with traditional ones. USBC’s scoring instructions describe the traditional method used on this page.
Equipment that helps
Scoring doesn’t take any gear, but a few pieces make the numbers go up for newer bowlers.
A ball that fits. A house ball with the wrong span makes a consistent release hard. A ball drilled to your hand is the biggest single upgrade; the best bowling balls for beginners covers forgiving first balls.
The right weight. A ball you can control for three games helps accuracy more than extra pin action. See what weight bowling ball to use for a sizing chart.
Something for the wrist. Bowlers who struggle to repeat their release often try a support; the best bowling wrist braces explains the main types.
Common scoring mistakes
Counting a strike as 10. A strike is only worth exactly 10 when the next two balls are both misses. Add the next two balls, even when they come from different frames.
Taking the spare bonus from two balls. A spare gets one bonus ball, not two. After 7 / followed by 5 and 4, the spare frame is worth 15, not 19.
Adding a bonus to the 10th frame. The 10th frame’s extra balls are its own bonus. Score it as the plain sum of its balls; don’t add the third ball twice.
Allowing an impossible count. Two balls in a frame can never total more than 10 pins in frames 1 to 9. If your sheet shows 7 and 5 in one frame, a ball was written down wrong.
Giving a third ball after an open 10th. The 10th frame only gets a third ball after a strike or a spare. A 7 2 in the 10th ends the game.
Related guides
- Learn to bowl: technique, etiquette and scoring for newer bowlers
- Bowling terms glossary: every mark and nickname on the score sheet
- What weight bowling ball should I use?: find a weight you can control for three games
- Best bowling balls for beginners: forgiving first balls for new bowlers
Frequently asked questions
How many points is a strike in bowling?
A strike is worth 10 plus the pins you knock down on your next two balls, so it is worth between 10 and 30. Three strikes in a row (a turkey) make the first of them worth the full 30.
How many points is a spare in bowling?
A spare is worth 10 plus the pins you knock down on your next ball. A spare followed by a strike is worth 20, and a spare followed by a gutter ball is worth 10.
How do you score the 10th frame in bowling?
Roll a strike or a spare in the 10th frame and you get bonus balls: two after a strike, one after a spare. The 10th frame score is simply the total pins from its two or three balls, added to your running total.
What is the highest score in bowling?
300, a perfect game. It takes 12 strikes in a row: one in each of the first nine frames and three in the 10th. Each frame is then worth 30.
What does a dash mean on a bowling score sheet?
A dash (-) means a miss: the ball knocked down no pins. It is used for a gutter ball on the first ball or for missing every standing pin on the second ball.
Why does my score not show after a strike?
A strike's value depends on your next two balls, so the frame total stays blank until you roll them. A spare's total stays blank until your next ball. Automatic scorers and the calculator on this page work the same way.